Service Hotline:13358057949
Location:HOME>>News>>Company News

News

PRODUCT SHOW
Company News+
Industry News+

Jiangsu Ourui Precision Intelligent Manufacturing Co. LTD

Phone:13358057949

Contact:Manager wang

Address:88 Beijing Road, Jianhu Development Zone, Yancheng City, Jiangsu Province, China

WeChat scan
  • 22
    2020-10

    Detailed introduction to the operating procedures of high-pressure fans

    The high-pressure fan can be installed at any angle, and it is firmly fixed on a horizontal and rigid foundation or base with screws. The basis weight is about 3 times of the high-pressure fan as the standard. Special attention should be paid to whether the base is uneven. If it is, the high-pressure fan table may be deformed when the bolts are tightened! A shock absorber can be instal···

  • 22
    2020-10

    How to install the correct way to improve the efficiency of the compressor?

        When the impeller rotates, due to the centrifugal force, the wind vane causes the gas to move forward and outward, thereby forming a series of spiral motions. The air between the blades of the impeller rotates spirally and squeezes the gas outside the pump body (inhaled by the suction port) into the side groove. When it enters the side channel, the gas is compressed, and then retu···

  • 22
    2020-10

    Three ways to teach you to prevent high-pressure fan erosion

    High-pressure fan refers to a fan whose wind pressure is 30kPa~200KPa or compression ratio e=1.3~3 under design conditions. The current industry generally classifies gas ring vacuum pumps as high-pressure fans. High-pressure blower, also called high-pressure blower, is different from general centrifugal blower. When the impeller rotates, due to the centrifugal force, the wind vane causes the ga···

  • 22
    2020-10

    Vortex high pressure fan: how to isolate noise from oxidation fan

         The mechanical wear of the vortex high-pressure fan is very small, because there are no other mechanical contact parts except the bearing, so of course the service life is also very long. As long as it is under normal use conditions, 3 to 5 years is no problem at all ; Maintenance-free use; its wearing parts are only two bearings, and basically do not need to be maintain···

  • 22
    2020-10

    How to deal with the unstable air volume of the high pressure fan

        High-pressure fan refers to a fan whose wind pressure is 30kPa~200KPa or compression ratio e=1.3~3 under design conditions. In the current industry, gas ring vacuum pumps are generally classified as high-pressure fans. High-pressure blower, also called high-pressure blower, is different from general centrifugal blower. When the impeller rotates, due to the centrifugal force, ···

Copyright © 2008-2020 江苏欧锐特精密智造有限公司 All rights reserved    苏ICP备2020052726号